Product may shrink by 2.0% following production. 1.5mm must be reserved for circumference printing.
Standard size for photo-cell checking is 2.0mm x 7.0mm, other sizes are available on request.
The area 3mm next to the tube shoulder should be clear from printing. The area 5mm from the tube end should be clear from printing. However these requirements can be adjusted upon request.
Tube diameter is set, length can be adjusted.
Specifications are for reference only. We recommend that customers measure the desired size again.
The length specified above does not include the seal end. If customer seals the tubes by himself, length should increase 5mm.